Commercial · Kelowna & the Okanagan Commercial Flat Roof Repair.
We repair every type of flat roof: torch-on, TPO, EPDM, PVC and tar and gravel. Leaks, flashings, blisters and ponding, for commercial, industrial, multi-unit and strata buildings across the Okanagan. Free estimates, and an honest answer about whether it is worth repairing.
Leaks, flashings, blisters and ponding.
A flat roof rarely fails all at once. It fails at one detail: an open seam, a tired flashing, a blocked drain. On a commercial building, that one detail can mean water on a tenant’s ceiling.
We find where the water is actually getting in, fix that, and tell you honestly what the rest of the roof has left.

Leaks.
Water rarely gets in where it shows up. It enters at one small detail, travels, and drips out somewhere else, so finding the real way in comes first.
- FreeVisit, Look & Quote

Flashings.
Parapets, curbs, vents and anything else that comes through the roof. These details give out years before the rest of the roof does.
- MostLeaks Start Here

Blisters.
Air or moisture trapped between the plies swells in the heat and lifts the roof. A blister that has not broken is not always urgent. One that has is an open hole, so it gets cut, dried and patched back in.
- Torch-On& Built-Up Roofs

Ponding.
Standing water is a drainage problem before it is a membrane problem. Sometimes the answer is a clear drain. Sometimes the roof needs more fall toward its drains. We will tell you which one you are looking at.
- TwiceA Year, Drains Checked
A repair that matches the roof.
Each flat roof is fixed its own way. The wrong sealant or the wrong membrane on a patch fails faster than the thing it replaced, so a repair is always made with material compatible with what is already up there.
Torch-On
Open seams, splits and blisters are cut back to sound material and patched with matching SBS, torched into the roof around it.
TPO
Aged TPO is cleaned back to fresh membrane so the new material will take, then a patch is heat-welded in place, the same way the seams were.
EPDM
EPDM is bonded, not welded. The old rubber is cleaned and primed, then a compatible patch goes on. The preparation is what makes it hold.
PVC
PVC is heat-welded, like TPO. Older sheet is cleaned with the right cleaner first, then a matching patch is welded in place.
Tar & Gravel
The gravel is cleared back, the roof underneath is repaired, and the gravel goes back on. Tar and asphalt do not mix, so we confirm which one you have first.
Pitched Roofs
Plenty of buildings have both. We repair shingle, metal, tile and cedar shake roofs too.

Repair or Re-Roof?
A problem in one spot, on a roof with years left, is worth repairing. If the old roof is dry underneath, a layover may be an option. If it is failing everywhere, a repair is money spent twice. We will tell you which one you have.
- RepairOne Failed Detail
- LayoverDry Underneath
- Re-RoofFailing Everywhere

Owners & Managers.
We walk the roof and send photos of what we find with a quote, ready for your owners or strata council. On an occupied building, we plan the work around the people inside.
- FreeInspection & Quote
- InsuredFor Hot Work
- FullWorkSafeBC Coverage
More for commercial roofs.
Roof Repairs
Roof repairs in Kelowna and the Okanagan: leaks, wind damage, flashings, blisters, cracked tiles, skylights and more. Free inspection.
Flat roof repair questions.
Need a commercial flat roof looked at?
Tell us about the building and what you are seeing, and we’ll come and take a look. Free estimates.
Free estimates • Every type of flat roof • Kelowna & the Okanagan







