Metal Roofing • Kelowna & the Okanagan
SHEET
METAL.
Standing seam and snap-lock panels in steel or aluminum with concealed fasteners — no exposed screws in the field. A Kynar 500 finish holds its colour for decades, and the smooth panels shed snow readily.
Or call directly 250-258-8600Standing Seam.
Concealed Fastener. Almost No Maintenance.
Modern metal roofing is built around concealed fastener systems that eliminate exposed screw penetrations — a common source of leaks on screw-down metal roofs. Every panel interlocks with the next, creating a continuous weather barrier with no exposed fasteners in the field.
The panels are fixed so they can expand and contract freely as they heat and cool. Kynar 500 PVDF coatings hold their colour for decades, resisting chalking and fading far longer than conventional paint finishes.
- Panels from Westform Metals, a BC manufacturer
- Concealed fasteners — no exposed screws to leak
- Natural snow shedding on pitched surfaces
- Kynar 500 fade-resistant finish
- Class A fire rating available
- One of the longest-lived pitched roofs
Built in
panels.
Watch a Premium standing-seam roof come together, snap-lock or mechanically seamed — panels that lock together with zero exposed fasteners in the field.
- 01Deck & RaftersFraming at 600 mm o.c. under staggered ply sheathing
- 02Eave MembraneHigh-temperature self-adhered course along the eave
- 03Synthetic UnderlaymentHigh-temperature synthetic over the field, courses lapped 150 mm
- 04Eave TrimHook eave over the underlayment — every panel end locks onto it
- 05Snap-Lock Panels305 mm pans hooked onto the eave, 25 mm seams snapped eave-to-ridge — every screw hidden by the next panel
- 06Ridge ClosuresZ-closures between the seams, set in sealant and screwed down
- 07Gable TrimCaps the outside seam on sealer tape, colour-matched screws
- 08Vented Ridge CapPerforated vent strip on the closures, cap hooked over it
- 09Snow RailClamped to every seam — nothing drilled through the roof
The Panel, Up Close.
Standing-seam steel with a Kynar 500 PVDF finish: panels run unbroken from ridge to eave, their seams raised and concealed-fastened with no screws through the field of the panel. It sheds snow more readily than any other roof we install.
- Paint warrantyfrom the panel maker
- Concealedno exposed fasteners in the field
- Kynar 500PVDF finish
- Sheds snowsmooth painted surface
Why Choose Sheet Metal.
Ideal For.
Metal outlasts almost everything else we install, on almost every kind of building. It does not rot, and it comes in profiles that suit anything from a shop to a lakefront house. The trade-off is cost up front.
-
Premium ResidentialCustom homes and high-end residential properties where long-term value, curb appeal, and low-maintenance performance are priorities.
-
Commercial & IndustrialCommercial buildings and industrial facilities that demand maximum lifespan, fire resistance, and low lifecycle cost from their roofing investment.
-
Mountain & Snow Country HomesProperties in heavy snowfall areas that benefit from metal’s natural snow-shedding ability, reducing snow load and the risk of ice dams.
-
Fire Zone PropertiesHomes and buildings in BC wildfire areas where a Class A roof matters most.
Sheet Metal in the Okanagan.
The Okanagan Valley presents unique roofing challenges. Standing seam metal is well suited to this climate.
Sheet Metal FAQ.
Ready for Metal?
Whether you’re building new, replacing an aging roof, or investing in a roof for the long run — we will work out the panel, the profile and the flashing details with you.